>
Brands
 
Shopping Cart
0 items
 
Featured
 

ARDUINO PRO MINI

ARDUINO PRO MINI
Click to enlarge
Price: Rs175.00
Availability: In Stock
Model: 656
Average Rating: Not Rated

No files to Download

Summary

Microcontroller ATmega328
Operating Voltage 3.3V or 5V (depending on model)
Input Voltage 3.35 -12 V (3.3V model) or 5 - 12 V (5V model)
Digital I/O Pins 14 (of which 6 provide PWM output)
Analog Input Pins 6
DC Current per I/O Pin 40 mA
Flash Memory 32 kB (of which 0.5 kB used by bootloader)
SRAM 2 kB
EEPROM 1 kB
Clock Speed

MHz (3.3V model) or 16 MHz (5V mod)

Power

 

The Arduino Pro Mini can be powered with an FTDI cable or breakout board connected to its six pin header, or with a regulated 3.3V or 5V supply (depending on the model) on the Vcc pin. There is a voltage regulator on board so it can accept voltage up to 12VDC. If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin on not VCC.

The power pins are as follows:

  • RAW. For supplying a raw voltage to the board.
  • VCC. The regulated 3.3 or 5 volt supply.
  • GND. Ground pins.
Write Review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

There are no additional images for this product.